Mazda 6 Forums banner

CLE P0137 please help

1 reading
5.2K views 7 replies 4 participants last post by  bova80  
#1 ·
I got CEL P0137 O2 sensor circuit- low voltage (bank 1 sensor 2 )

A while ago I got cel with P2187 P0139 I replaced the sensors and cleared codes. I did 60 mi in the city no CEL I hit the highway after 2 mi it showed again with cod P0137.Anybody knows whats the problem.
 
#5 ·
I don't reccomend using the defouler method, hasn't been working well for me at all.
Ever since putting mine in I've been running super rich and throw codes about 2x a month for low/no activity o2. I can't recall the codes at the moment but I was doing better having just the "catless" code turned off with the AP... Tried this defouler because I wanted to delete my egr but my state only allows one parameter in a "not ready" state. These other 2 codes keep popping up ever since the defouler..just waiting for some lift time so I don't have to lay in the snow to yank it out.
 
#7 ·
Bova - this something that happens with a catted or just an uncatted?
 
#8 ·
mainly uncatted, since it doesn't detect there is a cat. well my car was all one piece, I had the cp-e catted downpipe and the only CEL i would trigger sometimes is P0421 which is O2 warm up slow or something like that. would usually happen if it was really cold out and i got on the highway without the engine being all the way warmed up.