Instead of replacing the housings you should just replace the projectors.


Sent from AutoGuide.com Free App

 

The lenses themselves are extremely oxidized. I tried a oxidization repair kit from Mothers, but it only helped a little. I'm getting tons of scatter loss because of it.

 

tsx retrofit instead?
dont buy after market head lights
they suck!

 

Not sure that I have the capability or patience to try a retrofit.

 

you need to sand those bad boys down then, there is always a way to bring back the lenses, i know there is a couple write ups on here that involve wet sanding them down.
and your from 2006, they cant be that bad?

 

also opening up the head lights is easy and the retro fits arent that hard
again lots of good info in here with searching.

 

the left side is really bad, but i'll read up on the wet sanding. that might do the trick.