Mazda 6 Forums banner

1 - 5 of 5 Posts

·
Registered
Joined
·
319 Posts
Discussion Starter #1
Who has setup their MS6 for track days? What kind of coilovers/suspension have you installed? What tires and wheels are you running?

Seems like a lack of aftermarket parts to properly set up the MS6 for fun on the Track.

Is there a good coilover application yet? How about Koni's?

Have their been any magazines that have done a track car project MS6 yet?
 

·
Registered
Joined
·
5,757 Posts
Who has setup their MS6 for track days? What kind of coilovers/suspension have you installed? What tires and wheels are you running?

Seems like a lack of aftermarket parts to properly set up the MS6 for fun on the Track.

Is there a good coilover application yet? How about Koni's?

Have their been any magazines that have done a track car project MS6 yet?
[/b]
Koni's are great shocks, but until someone makes good springs to match them to, they're not going to be the best track combination. Especially without any big sways available, you're going to want much firmer springs. The standard '6 has Racing Beat springs and sways available to compliment the Koni's making for a much more attractive package.

So, go with KW or HKS coilovers.
 

·
Registered
Joined
·
166 Posts
I know that the MS6 and normal 6 share the same suspension measurements, so you can "Technically" get a coilover setup from the normal 6 for your MS6, however AutoExe apparently makes a coilover set for the MS6, you can get them at www.corksport.com just expect to pay a lot for them, autoexe is rather expensive stuff
 

·
Registered
Joined
·
210 Posts
Mazdaspeed makes a set, or Auto EXE makes chasis braces, coilovers, or springs, as well as swaybars

Im still trying to find a 8" wide rim the will fit 235 min hopefully 245 without rolling the fenders. But Idont think it will happen. :irate:
 

·
Registered
Joined
·
315 Posts
Mazdaspeed makes a set, or Auto EXE makes chasis braces, coilovers, or springs, as well as swaybars

Im still trying to find a 8" wide rim the will fit 235 min hopefully 245 without rolling the fenders. But Idont think it will happen. :irate:
[/b]

use RX8 wheels no problems.....great factory special look. Check out below....
 
1 - 5 of 5 Posts
Top