Mazda 6 Forums banner

Steering fault.

418 Views 5 Replies 2 Participants Last post by  TalonTsi90
2017 Mazda 6 hydroplaned and hit something off the road that ripped the left front wheel off the lower a-arm.
It bent the inner tie rod at a 90 deg angle. The steering rack seems fine. After rebuilding most of the left front suspension and changing the engine cradle and transaxle.( knocked the bearing out of the right side of the transaxle) It is running but I have a power steering fault I cannot figure. The steering wheel turns but the assist doesn't seem to be working. The car is still on stands so there is no resistance. Is there a reset procedure? The car had no power for 5 months due to battery removal. Any help appreciated.
1 - 3 of 6 Posts
If its not on the ground, how do you know theres no assist?
Well then, id stop worrying, cause at this point you dont even have a cart let alone a horse to hitch it to.
Like i said, you cant worry about that till the other stuff is fixed.
1 - 3 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.