Mazda 6 Forums banner
1 - 2 of 20 Posts

· Registered
Joined
·
681 Posts
Alright awesome so the popping is back lol and the car is running like crap again only this time i can hit the gas more than 20 percent throttle and it will rev up without popping lol. it mostly happens at low rpms now. my mafci box is soldered i heard that there are 2 diagnostic leds inside the box and they shouldnt be flashing? well 1 of them is. So i took the box off and ran straight up intake and the car ran exactly the same didnt really notice any power loss so either my box is bad or i dunno cuz i tripple checked the connections and they are all connected fine.. at this point not sure what to do i have no catalytic convertors and the dealer wont look at my car without them. Im trying my best to get them put back on but i have to wait on cp-e to send me the catted y pipe from kooks dunno how long thats gonna take. any suggestions?
[/b]
Did you try it without the MAFci and without the CP-E intake? Putting the stock air box back on and running without the MAFci would tell you if the box is bad. Just a thought...
 

· Registered
Joined
·
681 Posts
I only tried it without the box. I dont see how putting the stock airbox back on would tell me if the box is bad. slv6s could you do me a favor and open up ur mafci box and turn your key to on but dont start the car and tell me if any of ur 2 leds are blinking.. The thing that is puzzling me is that i ran like this for 4 months without a problems i didnt touch or change anything then all of a sudden one day the car shat itself
[/b]
Sorry man. My MAFci is sitting in my garage awaiting install.
 
1 - 2 of 20 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top