Mazda 6 Forums banner
1 - 20 of 20 Posts

·
Registered
Joined
·
272 Posts
Discussion Starter · #1 ·
The other passes were bad quality, I had a lot of heat soak on this run too...
StreetFire

Edit: uploaded a better quality version, but still same one.
 

·
Registered
Joined
·
113 Posts
wow I dont know whos exhaust you can actualy hear in that video, but which ever car, they could easily pick up a tenth by shifting better.
 

·
Registered
Joined
·
272 Posts
Discussion Starter · #4 ·
The BMW is all you can hear. He has a full exhaust system and who knows what else.
 

·
Registered
Joined
·
113 Posts
The BMW is all you can hear. He has a full exhaust system and who knows what else.
[/b]
He needs lessons
 

·
Registered
Joined
·
1,769 Posts
Nices, slips through third.
 

·
Registered
Joined
·
795 Posts
NICE video .
 

·
Registered
Joined
·
272 Posts
Discussion Starter · #8 ·
Here is the timeslip:
Me / Him
R/T: 0.307 ... 0.302
60': 1.933 ... 2.151
330: 5.773 ... 6.108
1/8: 8.988 @ 74.90 ... 9.337 @ 75.94
1000: 11.717 ... 12.117
1/4: 14.064 @ 96.66 ... 14.439 @ 97.19
 

·
Registered
Joined
·
922 Posts
a better 60' would have netted a 13 sec pass.. big p-lot at night FTW

nice vid though
 

·
Registered
Joined
·
870 Posts
Nice run.

I went to the track tonight and only got 1 run in before it started raining and they closed. Got a 13.950 to tie my record. I nailed all my shifts but had an average launch.

Track is closed for the season :( Next summer I'm going to get quite a few mods. Thinking of getting the mazaspeed lightweight 18's, exhuast, downpipe and hopefully some sort of tuning solution. I'd like to be in the low 13's :drive:
 

·
Registered
Joined
·
1,375 Posts
Nice run.

I went to the track tonight and only got 1 run in before it started raining and they closed. Got a 13.950 to tie my record. I nailed all my shifts but had an average launch.

Track is closed for the season :( Next summer I'm going to get quite a few mods. Thinking of getting the mazaspeed lightweight 18's, exhuast, downpipe and hopefully some sort of tuning solution. I'd like to be in the low 13's :drive:
[/b]
are you stock?
 

·
Registered
Joined
·
1,375 Posts
I would guess mid to low 5's. But I have no way to measure to 0-60.
[/b]
i thought our cars ran low 6's to high 5's..can't imagine just an intake would shave off .5 seconds..:/
 

·
Registered
Joined
·
870 Posts
i thought our cars ran low 6's to high 5's..can't imagine just an intake would shave off .5 seconds..:/
[/b]
I never claimed that, infact I don't think the intake makes much of a difference.

Mazda claims a 6.6s 0-100km/h. A review has gotten as low as 5.5s 0-100km/h stock. Which is probably 5.4s 0-60. If I were to guess the difference in times is how the car is launched. I doubt many reviewers launched the car at 4500rpm. Which would also explain the different 1/4 mile times.

Since I'm getting into 13's on the 1/4 mile, and until I have a way to measure it, I can only assume I'm getting a mid 5 sec 0-60 :)
 

·
Registered
Joined
·
272 Posts
Discussion Starter · #18 ·
I've taken out the silencer (resonator) only. I have a Belltronics Vector Pro GX2 and I'm running around 5.2s 0-60.

I don't have the vid of me running a 13.979 @ 97.12 earlier that night.

It was heat soaked in the video, which is why I didn't break into the 13's on that run.
 

·
Registered
Joined
·
870 Posts
I've taken out the silencer (resonator) only. I have a Belltronics Vector Pro GX2 and I'm running around 5.2s 0-60.

I don't have the vid of me running a 13.979 @ 97.12 earlier that night.

It was heat soaked in the video, which is why I didn't break into the 13's on that run.
[/b]
Do you run your GX2 at the track? If your 1/4 times match up between it and the track timing your 0-60 time would be pretty accurate.
 

·
Registered
Joined
·
272 Posts
Discussion Starter · #20 ·
I didn't use it this time... They were staging quickly and I couldn't set it before the lights would go.
 
1 - 20 of 20 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top