Mazda 6 Forums banner
1 - 4 of 4 Posts

· Registered
Joined
·
187 Posts
Discussion Starter · #1 ·
Ok i changed my pcv valve today after 8 hours of work and also changed my gaskets for the throttle body then after installing every thing back I started the car and now it putters and brings up code p0120. Also can some one tell me what this is? It dropped and cracked the top. Hope thats not the reason its puttering.


 

· Registered
Joined
·
1,522 Posts
Make sure you reinstalled all electrical connectors and hoses. Worst case you may have pinched a manifold gasket on install or maybe the PCV/hose came off.
IIRC that's the solenoid that opens the flap on the stock air box.
 

· Registered
Joined
·
187 Posts
Discussion Starter · #3 · (Edited)
Make sure you reinstalled all electrical connectors and hoses. Worst case you may have pinched a manifold gasket on install or maybe the PCV/hose came off.
IIRC that's the solenoid that opens the flap on the stock air box.
its cracked and i can see the wires in the solenoid. Do i got to replace it and if so what kind of solenoid is this?
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top