[Sharpee]

So basically all my roof interior lighting doesn't work, so at first went and got replacement led globes. However I'm facing a similar issue with it not turning on, I'm not to sure whether this is a wiring issue or not but some help would go a long way.

 

[TalonTsi90]

I presume you tried moving the switch to Door?

 

[Sharpee]

I presume you tried moving the switch to Door?

Yea

 

[TalonTsi90]

Aside from the change you put both LEDs in backwards, the only other thing i can suggest is find the wiring diagram and test the plug to see if youre getting power, if not, then the ROOM fuse if prob shot.

 

[OkieRick]

Aside from the change you put both LEDs in backwards, the only other thing i can suggest is find the wiring diagram and test the plug to see if youre getting power, if not, then the ROOM fuse if prob shot.

That was my first thought, the fuse. Underneath the dash, driver’s side, left leg area. Pull out the cover.

i will admit, those pesky little LED’s can be a bit cantankerous. If they are not seated in their holder correctly, pull ‘em out, flip them over, and reinstall. That is always the first mod I do: removing those yellowish tinted interior lamps. LED’s in the cabin are the only was to go.

 

[mitro6ual]

do the buttons work the lights? Mine went out on "door" so only the buttons light it up.
If the "room" fuse is blown, then no interior lights or radio would work.

 

[OkieRick]

Aside from the change you put both LEDs in backwards, the only other thing i can suggest is find the wiring diagram and test the plug to see if youre getting power, if not, then the ROOM fuse if prob shot.

Another thought: if you were using any type of metal-based tool to remove the OEM bulbs, there’s a high probability you blew the fuse if the tool grounded out. DO NOT ASK HOW I KNOW THIS. I take the fifth amendment.