Mazda 6 Forums banner

1 - 7 of 7 Posts

·
Registered
Joined
·
6 Posts
Discussion Starter #1
Three of the tires have 4,000 miles on them. One tire has 500 miles on it. One rim is very slightly bent. I'll post measurements of the amount it is bent later.

Tires are stock Bridgestone 215/45-18. Rims are 18" x 7" with a 5-4.5" bolt spacing and a +60mm offset.

Will not seperate. Tires and wheels are located in Northern California.

$750 plus actual shipping costs.

Jack Hidley
 

·
Registered
Joined
·
6 Posts
Discussion Starter #2
Price reduced to $650 for the set.

Pictures available. Add your e-mail to this thread and I'll send them.

The bent rim has the inner lip bent sideways (outwards) 0.1". It can be fixed in 1 minute with a plastic dead blow hammer once the tire is dismounted. As is, the bend is so small that it can't be felt when driven.
 

·
Registered
Joined
·
6,771 Posts
Please review Buy/Sell rules now. You need to put up a picture that complies with the rules. Normally, threads this old are exempt, but considering you have only posted twice on this board (in this thread), you need to comply. Failure to comply within a day will result in this thread being locked.
 

·
Registered
Joined
·
3,563 Posts
I'll give you $500 plus shipping for them, zip code 21117...
 

·
Registered
Joined
·
6 Posts
Discussion Starter #5
Pictures of the wheels and tires below.

http://home.comcast.net/~jhidley/Mazda_wheels_1.jpg
http://home.comcast.net/~jhidley/Mazda_wheels_2.jpg
http://home.comcast.net/~jhidley/Mazda_wheels_3.jpg

One of the rims has a little bit of curb rash. You can see this in the third photo. All the other rims have no curb rash. One of the rims still has brake dust on it.

Each wheel and tire weighs 46lbs. Rounded up to 50lbs to include the packaging this will cost $36 per wheel/tire to ship vis UPS ground to any of the 1xxxx-2xxxx zip codes.

Paul (Lapis), $500 is not a fair price, so no thanks.

Jack Hidley
 

·
Registered
Joined
·
249 Posts
when u say "bent" what exactly do you mean? is it from hitting the curb? are there stability/balance issues?
 

·
Registered
Joined
·
6 Posts
Discussion Starter #7
1 - 7 of 7 Posts
About this Discussion
6 Replies
4 Participants
Jack Hidley
Mazda 6 Forums
Mazda6club.com is a forum dedicated to the Mazda6 / Atenza. Come and discuss reliability, performance, modifications, and more!
Full Forum Listing
Top