Mazda 6 Forums banner

1 - 2 of 2 Posts

·
Registered
Joined
·
7 Posts
Discussion Starter #1
Can somebody who has a factory electrical manual get me the connector pinout diagrams for the front seats from a 2006/2007 mazdaspeed 6?

I'm putting the seats in my fusion and I need to move pins / splice the connector in... but I obviously don't want to deploy the airbag... and no, my car DOES NOT HAVE BAGS.

If you want to email them, I'm shane_southwood AT yahoo.com.

Thanks in advance.
 

·
Registered
Joined
·
7 Posts
Discussion Starter #2 (Edited)
LOL, for all of you schematic-challenged slackers. Anyone interested in retrofitting MS6 seats into another car (probably the same schematic as the regular 6)

Here are the pin-outs. The colors are for 2006, so they'll probably vary for 07 (normal mazda trickery)

Legend:
* == omitted wire, no connection
X == connector locking tab

Driver Seat (C30)
-------------
| 1 X X 5 7 |
| 2 3 4 6 8 |
-------------

1 Black - Ground
2 *
3 White/Green - Buckle Switch+
4 Black - Ground
5 Pink - Power Seat+
6 Red/White - Heating Element+ (from toggle switch)
7 Blue - Seat Track Position Sensor
8 Green - Seat Track Position Sensor


Driver Airbag (c109)
-------
| 1 2 |
-------

1 Pink
2 Violet


Passenger Seat (C41)
----------------
| 1 5 7 * * 11 |
| 2 6 * * * 12 |
----------------

1 Black - Ground
2 Black - Ground
5 Black/Blue - Seat Weight Sensor Control Module +
6 Black Seat - Weight Sensor Control Module -
7 Blue/White - SAS Control Module (Pass "Airbag Off" Indicator)
11 Blue/Red - Heating Element+ (from toggle switch)
12 White/Blue - Buckle Switch+


Passenger Airbag (c110)
-------
| 1 2 |
-------

1 Red
2 Green
 
1 - 2 of 2 Posts
Top