Mazda 6 Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 34 Results
  1. Models / Trim
    Hello! I am looking to see what the name of this part is. It is highlighted in red. I got into a small accident and it broke that whole part and poked a hole in the radiator. I fixed the radiator and but the hood is bent and the hood hinge and stuff is holding on by a thread. Thank you for...
  2. Electrical / HVAC / Lighting / Audio
    Hi, I would like to update the version of the firmware in my mazda 6 (2017). I'm looking for a guide to do this my self, I live in West Europe so I will need the european version of the firmware. Can someone help me? Thanks a lot
  3. Mazda 6 1st Generation (2002-2008)
    I have a 2007 Mazda 6 2.3L 4-cyl that I’ve had for about 3 years. Its current mileage is at 220,000. A few months ago a small little rattle started because of what I’d assumed to me bad/low oil. So I had it changed and it still continued to rattle. Someone suggested I changed the vvt solenoid so...
  4. 3.0L V6
    So my Mazda 6 04 started to get jumpy this week while accelerating at certain rpms what I mean by jumpy is sporadic acceleration instead of a smooth constant accelerating I had the same problem a while back but when I was stopped in drive and it turned out to be a vacuum leak. Anyways I've been...
  5. Byakuya's 2020 Mazda Miata RF

    My wife and I finally got the finances in order to get ourselves our dream car: a 2020 Mazda Miata RF Grand Touring in Soul Red Crystal! We drove 800 miles (12 hours total) through mountain passes to get this thing before it was scooped up. The car only has 7400 miles on it and is hands down the...
  6. Mazda6 (Atenza)
    Hey guys, I’m looking into buying the chronos s style rear diffuser, and where I was wondering if anyone has any information on to install it?
  7. Newbie Section
    Hello! I'm a big Mazda fan, and have had many other Mazdas, but this is my first 6. So far I have to say I love it more than the rest of them. Bought at 72k miles, just did a bunch of maintenance on her, and she runs like a champ! Can't wait to start modding her and doing some cool things...
  8. 2.5L I-4
    Hi everyone, I'm experiencing a strange issue with my 2010 Mazda6 that is extremely unsettling on a day-to-day basis. When I'm at very low RPMs and foot off the gas my RPMs jump insanely high when turning the steering wheel causing me to panic brake. I have no idea what's going on. My regular...
  9. Mazda6 (Atenza)
    Hello, I am looking for a manufacturing date for a 2.0L V6 engine with engine code KF747022 that my grandad purchased for his kit car many years ago. He is having trouble with ensuring the engine meets modern emission requirement however, with proof of manufacture prior to 1993 the engine will...
  10. Mazda 6 1st Generation (2002-2008)
    Hello everyone. I’ve got a 2006 Mazda 6 TS2 2.0L UK spec. Today I failed an MOT on emissions and kind of lost what to do. Could you suggest any exhaust alternatives to the original one? Maybe from an MPS or RX-8? Has anyone had any problems with exhaust and if yes, how did you solve it? I...
  11. Newbie Section
    Hi All I am thinking of buying a 2010 Mazda 6 that currently has 104k on it. I just wondered as i am new to these cars, what should i be looking out for and also what are repair costs like if required? Thanks in advance ☺
  12. 2.3L I-4
    i recently tried a setup where i brough a old airbox for my car as i dident want to cut up my other stock one and i cut everything off exept the housing and connected my cold air intake to it so it would look nice but for some reason when i throttle on the revs drop and it nearly stalls and i...
  13. Newbie Section
    Hello all, I'm new to the forum and soon to be a Mazda 6 owner. For my price point I have a tough choice and need advice. I can either get a 2017 grand touring, or a 2018 base model. The grand touring has all the bells and whistles, but the new model has the new body style. Advice? Are the...
  14. Want To Buy
    I'm in the market to buy one of these rare signs for decoration in my garage, does anyone have one that they are willing to part ways with? Sorry if this isn't quite relevant.
  15. Mazda 6 3rd Generation (2013-Present)
    Hello, I have a problem. So my Mazda dealership here in Iceland called in our Mazda 6 2013 because of some problems. They changed some leavers and restarted or fixed the PCM computer. The problem is that when we got the car 2 days later something was wrong with the car. First of all my wife...
  16. Mazda6 (Atenza)
    Hi Guys, In recent months, the Check Engine light has come on about once a week and seems to be a TPS related fault. I searched for many tools for elm327 and all didn't work until I came across "Throtte Reset OBD2" and I followed a video and article which show which adapter to use and how to...
  17. 2.0 Diesel
    Hello guys, I am new here. I own 2006 Mazda 6 2.0 Diesel with rf7j engine. My problem is next - one of four fuel injectors is not working, so I have to change it. Now I have heard that different fuel injector will have different code (?) and it may not go with my car. I found part number with...
  18. 1st-Gen
    Hellloo mazda folk. Long time reader, first time posting. Long story short; I live in the carribbean and Locating parts is a bit difficult, so I have to get them overseas and I keep finding the US LHD parts rather than the JDM RHD parts and I am unable to find specific parts that I need. So...
1-20 of 34 Results
Top