Mazda 6 Forums banner
1-20 of 32 Results
  1. 2.5L I-4
    Hi everyone, I'm experiencing a strange issue with my 2010 Mazda6 that is extremely unsettling on a day-to-day basis. When I'm at very low RPMs and foot off the gas my RPMs jump insanely high when turning the steering wheel causing me to panic brake. I have no idea what's going on. My regular...
  2. Newbie Section
    I have a 2005 Mazda6 3.0 V6 with the Bose sound system, I got this new headunit from Amazon : So, I have everything hooked up as far...
  3. cai

    Newbie Section
    why would i need a vacume line in a cold air intake and how does it work. also could i just block the vacume lines and any others off?????
  4. 2.3L I-4
    i recently tried a setup where i brough a old airbox for my car as i dident want to cut up my other stock one and i cut everything off exept the housing and connected my cold air intake to it so it would look nice but for some reason when i throttle on the revs drop and it nearly stalls and i...
  5. Mazda 6 1st Generation (2002-2008)
    So my son popped my ignition out of my 2003 mazda 6. I've ran a wire from the starter straight to my battery so I can turn the key on and hit the starter. For some reason it won't completely start.. Is there something else I need to do??
  6. 1st-Gen
    replaced the waterpump that distinctively gave the screeching noise, still screeching thru acceleration, could camshaft oil seal be making this noise?
  7. Newbie Section
    Hello all, I'm new to the forum and soon to be a Mazda 6 owner. For my price point I have a tough choice and need advice. I can either get a 2017 grand touring, or a 2018 base model. The grand touring has all the bells and whistles, but the new model has the new body style. Advice? Are the...
  8. 3.0L V6
    Soo I have the 03 Mazda 6 3.0 with 160k miles. The engine was rebuilt bore .50 over, cat back flow master exhaust. One day the car started missing I cleared codes it was good for about 4 months then one day it started missing so bad I couldn’t drive it. So it got towed and the spark plugs were...
  9. 3rd-Gen
    Hi there, I live in New Zealand and im trying to figure out how/where I can get some reliable LED DTR headlights (The style as seen on the car in the header of this website) Theyre very expensive to get brand new from Mazda and I do not trust the ones of ebay. While discussing this with a...
  10. Electrical / HVAC
    The previous owner did some modifications to the car which was not disclosed. After my mechanic replaced the starter of the car, he forgot how these wires go in or match. These are what seems to be the only ones left that are not plugged in. The check engine light is also on after replacing the...
  11. 1st-Gen
    Hey guys, my wife bought a 2005 Mazda 6i hatchback a few months ago and the headlights suck. My car has HIDs and she loves them so for Christmas i got her a plug and play kit, when i was installing it one of the bulbs wouldn't work once i turned it off and back on. I followed the manufacturer's...
  12. Mazda 6 1st Generation (2002-2008)
    I plan on doing a turbo upgrade with the stock speed6 turbo and can't find/figure out what Turbomanifold will be needed that will be good cost-wise and work well. Below are the parts I'm planning on getting for the build and other things. It's a stock engine with 112k miles on it and pretty...
  13. Mazda6 (Atenza)
    So I recently bought a used car (a 2010 Mazda6) It has the check engine light and my dad’s code scanner is saying it’s the Park/Neutral safety switch yet I can’t find anything on how to find or fix it. I’m also not a car guy so any help would be greatly appreciated.
  14. 2.3L I-4
    My 2004 2.3L I-4 is using about a quart of oil every two weeks. It’s not smoking at all, no abnormal engine noise, or tapping. Car runs great I must say for having almost 160k on it. I’m just curious where my oil is going?! Any suggestions are greatly appreciated! Cheers
  15. Newbie Section
    I have an 04 2.3l that needs the passenger cv axle replaced. I went out and bought the new replacement axle. Now I’m just wondering if there’s any tips you guys could give me on how to replace it the easiest because I’m reading different things and a lot are saying they can be a nightmare to get...
  16. Mazda 6 2nd Generation (2008-2013)
    Hi guys, I'm a complete idiot and accidentally threw away my keys to my 2009 Mazda 6 iSport on Sunday night. Sadly, I didn't have a back up key. Had the keys remade today but as soon as the locksmith put the key into the door, it immediately locked all doors and the key would not unlock the...
  17. 2.0-2.2L Diesel
    I have a 09 2.0d uk spec 6 Guess the answer to this is probably no but. Should I be able to move the serpentine belt tensioner in and out As in pull out towards the chassis leg and then push in towards engine ?? Thanks in advance
  18. Mazda 6 2nd Generation (2008-2013)
    So Iam in a street racing bracket because why not nothing better to do Iam trying to figure out what I could do for under $50 to get more power out of my 2010 Mazda 6 2.3 l4
  19. 3rd-Gen
    Have a 2015 Mazda6. My front passenger window hasn't been working. Initially it was giving me intermittent auto down issues. Otherwise still worked fine, auto up was fine, just needed to hold the button down go roll down. Then auto up stopped working as well. Now its at the point where if I hold...
  20. Newbie Section
    Hi guys, Does anyone know why only one of the front map lights would be working? I tried a new bulb however nothing, I tried the bulb from the working side and nothing. Any ideas??
1-20 of 32 Results