Mazda 6 Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-12 of 12 Results
  1. Electrical / HVAC
    While driving today, I hit a bump in the road and my visor came loose while driving and the wires connecting to the visor light were visible. I tried to carefully push the wires through the visor hole and re-secure the visor. During this process the entire console turned off. I have no radio, no...
  2. Engine / Drivetrain
    I have a 2004 Mazda 6s wagon and I've heard so many different people say different things about this being possible and not insanely expensive. My question is, are the engine mounts the same? Do you have to rewire as much as people say? Is it worth it? And pls don't tell me to just buy a new...
  3. Engine / Drivetrain
    My 3.0 v6 has developed what I believe to be rod knock, and I dont have much hope for it. However, I have a good 3.5L v6 out of a Taurus X laying around doing nothing. They look similar from the top, but I dont know for sure. Has anyone heard of this swap? I have the MTX, so at least the...
  4. Newbie Section
    Hey guys so today I was just thinking about how electric vehicles are becoming the buzz, I've loved my '04 3.0L since I got it last year it being my first car ever and I just liked the idea of standing out, not really a JDM vs Muscle stance but you don't see much of this type of car being on...
  5. Mazda 6 1st Generation (2002-2008)
    Hey everyone I have an 04 mazda 6 v6 3.0L and am wanting to make it run a little bit smoother and better acceleration. It really could probably use a tune up but I'm thinking about adding a cold air intake before getting a tune. I've never done any mods to a vehicle so I'm really just looking...
  6. 1st-Gen
    I just bought a 2004 6 3.0 with 134k miles on it. Sometimes during cold start it makes an odd rattling noise for a second, and also a noise at 1-2k revs sometimes when warm. The car is throwing the p0345 (cam position sensor circuit ) and p0012 (intake cam bank 1 over - retarded). The car runs...
  7. Newbie Section
    Hi! I'm seeking your help in finding this part. I have ordered this part from two different suppliers, and what I have received is a wrong part (a vapor canister solenoid, for example. I thought it was enough to look for a "EGR solenoid" for the car, but I'm coming to understand I need a...
  8. Newbie Section
    I’m trying to upgrade my exhaust, looking for a cat back system but I can’t anywhere. Does anyone know where I can buy a cat back for my car and if not, will a 2006 cat back system fit my car?
  9. 1st-Gen
    Hello mazda 6 club, kinda new here but wasn't sure where to go. I have an 04 Wagon V6. Out of nowhere I was driving home from work this morning when I noticed the radio cut out, then the traction control system light came on, and the speedometer cut out, got a little ways down the street then...
  10. Exterior Modifications
    I've had my Mazda 6s wagon for under a year and I got an idea to mount a 2018 Mazda 6 front end on to my front end. I got this idea when I saw a guy who has a Nissan Stagea 260rs and he put the front end of an R34 GTR onto his. I am wondering if that would be possible with my idea. Now I have...
  11. 1st-Gen
    IS the 2004 3.0L V6 DOHC 24V engine compatible with the 2006 model? My timing chain jumped a couple teeth, and my valves are smashed, I found a GREAT deal on a 2004 Mazda6 V6 3.0 engine. Can I put the 2004, into my 2006? Also, the '04 is Automatic, and My '06 is the 5speed.
  12. Newbie Section
    Could use some much needed help. I replaced upper plenum gaskets with no problem. I put everything back together, but I can't seem to locate where one of the vacuum hoses from the canister purge valve goes to. I did take a few pics of the engine compartment before doing the job, but I still...
1-12 of 12 Results
Top